EasyWalker Mini Buggy+ Manual page 25

IMPORTANT: Do not use the Buggy+ if any part is
broken, torn, incomplete or does not seem to be
functioning correctly.
IMPORTANT: The Buggy+ is not designed for use when
jogging or roller skating.
Do not forget to complete the warranty form on the
website (www. easywalker.eu).
Maintenance
Check your Buggy+ regularly.
Regularly clean the Buggy+. Use a damp cloth and a
mild cleaning solution if necessary.
The swivel wheel holders and the front wheel axles
get dirty. Take the wheels off on a regular basis and
clean them with lukewarm water. Ensure that all parts
are dried thoroughly and oil the axles lightly with oil
or silicone spray before replacing the wheels.
Avoid exposing the Buggy+ to extreme temperatures.
The Buggy+ is not resistant to salt water. Never
bleach, dry-clean.
Fabrics used on the Buggy+ are removable and
washable. Before washing always remove the
fastenings, foam, plastic or metal parts. Always refer
to the washing label on each part.
During wet weather always use the rain cover. If the
Buggy+ is wet due to cleaning or rain do not fold but
leave to dry, opened out, in a well ventilated room.
Parts of the Buggy+ can slightly discolour or become
worn as a result of weather conditions and usage. This
can also occur with normal usage.
to the washing label on each part.
During wet weather always use the rain cover. If
the Buggy+ is wet due to cleaning or rain do not
fold but leave to dry, opened out, in a well
ventilated room.
Parts of the Buggy+ can slightly discolour or
become worn as a result of weather conditions
and usage. This can also occur with normal usage.
The utmost care was exercised in designing and
compiling these instructions. The content however,
is subject to change without notice. Easywalker
shall not be liable for technical errors or omissions
contained in this manual.
The purchased product may differ from the
product as described in this manual. Check for the
most recent manuals the Easywalker website.
www.easywalker.eu
25