Wireless Charger - Renault Radio Connect R&Go Manual

WIRELESS CHARGER

1
Introduction
Use the induction charging zone 1 to
charge a telephone without connecting
it to a charging cable.
Note: for more information on compat-
ible telephones, contact an authorised
dealer or visit https://easyconnect.
renault.com.
The inductive charger uses open
source software under licence BSD-
3-Clause, which contains restrictions
and limitations which you should
learn about at Open Source Initiative.
(1/2)
2
Charging procedure
Position your telephone in the 2 induc-
tion area 1.
Phone charging 2 is interrupted in the
following cases:
– an object is detected in the induction
area 1;
– the induction area 1 is overheating.
Once the temperature has dropped,
your telephone's charging proce-
dure 2 will soon restart.
3
4
1
Charging progress
Progress of the charging is shown on
the audio system front panel:
– phone charging 3;
– phone charged 4.
Note: it is preferable to remove the
protective bodyshell or case from your
telephone before charging, in order to
obtain optimal charging.
GB.35