Download Print this page
Assa Abloy Lockwood 3579 Series Mounting Instructions
Assa Abloy Lockwood 3579 Series Mounting Instructions

Assa Abloy Lockwood 3579 Series Mounting Instructions

Mortice lock

Advertisement

Quick Links

HAND OF DOOR ACCORDING TO ENGLISH PRACTICE
RIGHT - HAND DOOR
LEFT - HAND DOOR
OUTSIDE
OUTSIDE
OUTSIDE
OUTSIDE
DOOR OPENING
DOOR OPENING
DOOR OPENING
DOOR OPENING
IN
OUT
IN
OUT
Determine hand of lock required from hand of door chart above.
All Lockwood 3579 Series Mortice Locks are mounted in accordance
with these instructions. Locks may or may not have cylinders,
lever handles, turn knob or emergency button. Disregard instructions
referring to the features not required.
Important : Before drilling door, ensure correct hand is being installed.
NOTE: CASE DOES NOT need to be opened, to change HAND or
FUNCTION of LOCK.
HANDING OF LOCK
Determine hand of lock required from above hand of door chart.
Rotate bolt head to suit latching direction.
2
COMBINATION
LOCKABLE
LOCKABLE
SNIB CAM
Rotation of the Snib Cam hands the lock. Use a small screwdriver to rotate
cam if required.
Combination locks
(Both handles can be locked) DOT in the up position.
SETTING KICK-OFF FUNCTION
3
To de-activate KICK-OFF function, ensure the lock is unlocked, then
remove the KICK-OFF screw as shown. Rotate screw in the direction of
the arrow as the screw is left hand thread.
3579 SERIES MORTICE LOCK
MOUNTING INSTRUCTIONS
SETTING LOCK STATUS
1
UNLOCKED
LOCKED
Ensure lock is in UNLOCKED position.
To UNLOCK (if required), using a small screwdriver, lever out Cylinder Hole
Plug where fitted and lift snib using the screwdriver.
SETTING LOCK STATUS
ESCAPE
LOCKABLE
Vestibule Locks
With single action escape feature. DOT to be DOWN on ESCAPE
side and UP on LOCKABLE side.
TURN KNOB ADAPTORS
4
TURN KNOB CAM
Establish which side the adaptor is to be located, lever out Cylinder hole plug
where fitted.
PUT LOCK IN LOCKED POSITION, as shown in Step 1.
Insert Adaptor into lock body with TOP of Turn Knob Cam point away from front
of lock body. Ensure Turn Knob Cam is engaged in yoke of snib as shown.
Place retainer pin through front plate to retain adaptor to lock. Ensure pin is
flush with front plate
VESTIBULE
RIGHT HAND
DOOR
VESTIBULE
LEFT HAND
DOOR
YOKE
FOLD LINE ALONG EDGE OF DOOR 60mm BACKSET
ENSURE LOCK IS REMOVED FROM MORTICE
BEFORE DRILLING HOLES
DO NOT DRILL HOLES RIGHT THROUGH DOOR
TO PREVENT POSSIBLE DAMAGE TO DOOR FACE

Advertisement

loading
Need help?

Need help?

Do you have a question about the Lockwood 3579 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Assa Abloy Lockwood 3579 Series

  • Page 1 Determine hand of lock required from hand of door chart above. UNLOCKED All Lockwood 3579 Series Mortice Locks are mounted in accordance with these instructions. Locks may or may not have cylinders, lever handles, turn knob or emergency button. Disregard instructions referring to the features not required.
  • Page 2 Screw strike and strike box to the door frame with not over-tightened. two screws supplied with mortice lock. ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2017 The global leader in door opening solutions...