Installation Preparations; Checking Installation Tools; Checking Circuit Breakers; Checking Components - Huawei OceanStor V3 Series Quick Installation Manual

1 Installation Preparations

1a

Checking installation tools

The following installation tools are required:
 Phillips screwdriver (M3 to M6)
 Flat-head screwdriver (M3 to M6)
 Diagonal pliers
 Floating nut mounting bar

Checking components

1c
Only materials used in the installation process are listed here. The Packing List contains all materials required by the installation. The bag
containing the Packing List is attached to the outside of the carton.
Each controller of the OceanStor 5300 V3 is equipped with four GE electrical ports. Each controller enclosure of the OceanStor 5500 V3 is
equipped with four SmartIO ports that do not support IP Scale-out networking. The following sections describe the process for installing the
OceanStor 5500 V3. The process for installing the OceanStor 5300 V3 is similar.
Controller enclosure (2 U)
Disk enclosure (2 U)
Installation template (for
4 U devices)
Installation template
Front panel of a
(for 2 U devices)
2 U device
Ground cable
Mini SAS HD electrical
Floating nut and M6 screw cable
Front panel of a 4 U
device
Mini SAS HD optical
cable
Multi-mode optical fiber
1b

Checking circuit breakers

NOTICE
A storage system power failure may cause devices connected
to the same circuit breaker to power off unexpectedly.
Therefore, ensure that the storage system power supplies
have functioning circuit breakers with the following amps:
 AC power: not smaller than 10 A
 DC power: not smaller than 30 A for controller enclosures,
not smaller than 18.5 A for disk enclosures
Disk enclosure (4 U)
High-density disk enclosure (4 U)
Cable tray Adjustable guide rails
Network cable
cable
3
Ball bearing guide rails
Serial cable