Advertisement
Perfect it Guide
Proper positioning is needed to achieve optimum standing posture.
step one - measure
Before transfering into the stander,
measure for approximate (A) seat
depth and seat to (B) foot plate set-
tings
step two - seat depth
Use the above measurement (A) to
adjust the seat depth on the stander.
To adjust seat depth, loosen the knob
under the seat (C). Depress the snap
button on the adjustment tube while
moving the back (D). Tighten the knob
after adjusting.
For the Evolv: Use measurement "A"
and measure from the front of the
seat to the back. Adjust the seat depth
until the proper measurement has
been reached.
For the Glider: Use measurement "A"
and measure from the center of the
kneepad to the back. Adjust the seat
depth until the proper measurement
has been reached.
step three - back angle
After achieving your desired seat
depth, rotate the back angle (E) adjust-
ment knob so the (F) seat/back angle
indicator is in the green area prior to
standing.
Note: Repeat steps 2 and 3 for each
color adjustment.
These adjustments are only to be made while the unit is in the seated position.
www.easystand.com
Evolv & Glider
™
(A)
(C)
(E)
over . . .
800•342•8968
(B)
(D)
(F)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EasyStand Evolv
Summary of Contents for EasyStand Evolv
- Page 1 (D). Tighten the knob after adjusting. For the Evolv: Use measurement “A” and measure from the front of the seat to the back. Adjust the seat depth until the proper measurement has been reached.
- Page 2 (J). step six - kneepad For the Evolv: Adjust the (K) kneepad so it fits comfortably up to the knees. For the Glider: Slide into kneepads (L) and secure the calf straps behind the knees.
Need help?
Do you have a question about the Evolv and is the answer not in the manual?
Questions and answers