Engine Oil Change; Clean/Inspect Engine Oil Filter - Husqvarna W 100D Operator's Manual

ENGINE OIL CHANGE
The engine oil on a new engine becomes contaminated from the initial
break-in in internal parts. The initial 50 hours oil change and filter
cleaning is very important.
Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
OIL FILLER
CAP/DIPSTICK
1. Position a container under the engine to collect waste oil.
2. Remove the drain plug located on the bottom of the cylinder block.
Allow oil to drain.
3. After all oil has been drained from the engine, install the drain plug
and tighten.
4. Dispose of used oil properly.

CLEAN/INSPECT ENGINE OIL FILTER

DRAIN PLUG
MAINTENANCE
OIL FILTER
FILTER CAP
BOLT
27