Assembling And Adjustments; Check The Oil Level; Check The Air Pressure In The Tyres; Connect The Hydraulic Hoses - Husqvarna PP 325 E Operator's Manual

ASSEMBLING AND ADJUSTMENTS

Check the oil level

The power pack is supplied with 12 litres of hydraulic oil 466
cSt HSH of a well-known brand. The oil is an environmentally
adapted and SP approved ester oil that will drastically reduce
the risk of allergic reaction or skin irritation upon contact. In
addition, the oil is quickly degradable in case of unintentional
release.
• Check the hydraulic fluid level in the power unit. This is
checked with the level indicator.
Min. level = red line
Max. level = black line
Do not exceed the max. level when filling the tank with
hydraulic fluid. The hydraulic fluid expands when it gets hot
and can overflow if the level is too high. Tank volume 12 l (3.2
US gallons).

Check the air pressure in the tyres

• Check the air pressure in the tyres. This should be 2 bar.
8 –
English

Connect the hydraulic hoses.

• The couplings should be wiped clean to reduce the risk of
leakage before the hoses are fitted.
• The couplings are locked by turning the outer sleeve on
the female coupling so that the slot moves away from the
ball.
Hydraulic hose, return IN (B)
Hydraulic hose, pressure OUT (A)

Connect the water cooling

• Connect a water hose between the upper cooling
connection on the hydraulic oil tank and the working tool,
and also a hose from the closest hydrant via a tap to the
lower cooling connection on the tank.
• If no tool requiring water is used, just let the cooling water
flow to the closest floor drain.