Starting The Engine - Husqvarna W 100D Operator's Manual

OPERATION
STARTING THE
1. Fill fuel and engine oil.
2. Prime the pump.
3. Open the fuel cock
4. Adjust governor control handle bar to position of "START" and tighten
it.
5. Press down decompression lever, and pull recoil starter.
a. Pull recoil starter until the resistance is felt, and then return the
hand back to previous position.
b. Push the decompression lever down and release it. After the start of
diesel engine, decompression lever will return to its previous position
automatically.
18
ENGINE
STOP
START
START