Engine Oil Change - Husqvarna W 40P Operator's Manual

MAINTENANCE

ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
Place a suitable container below the engine to catch the used oil, and
1.
then remove the oil filler cap/dipstick, drain plug and sealing washer.
Allow the used oil to drain completely into an approved container,
2.
then reinstall the drain plug with a new sealing washer, and tighter it
securely.
With the engine in a level position, fill to the edge of the oil filler hole
3.
with the recommended oil.
Engine oil capacities
W 40P 0.45 L
NOTICE
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of used motor oil properly.
Put it in a sealed container, and take it a recycling center. Do not
throw it in the trash, pour it on the ground, or pour it down adrain.
Screw in the oil filler cap dipstick securely.
4.
29