Removing And Fitting The Battery; Inserting The Battery; Removing The Battery; Switching The Blower On/Off - Stihl BGA 85 Instruction Manual

8 Removing and Fitting the Battery

1
2
► Align peg (3) with slot (2).
► Push nozzle (1) onto the blower tube (4).
► Twist nozzle (1) until it locks into position.
8 Removing and Fitting the Battery
8.1

Inserting the Battery

1
2
► Push battery (1) as far as it will go into the battery
compartment (2).
The battery (1) engages with a click.
8.2

Removing the Battery

► Place blower on a level surface.
► Keep one hand in front of the battery compartment so that
the battery (2) cannot fall out.
0458-286-9621-A
4
3
► Press both locking levers (1).
The battery (2) is unlocked and can be removed.

9 Switching the Blower On/Off

9.1

Switching On

► Hold the blower with one hand on the control handle -
wrap your thumb around the handle.
1
► Push the retaining latch (1) with your thumb to position
► Depress the trigger lockout (2) with your hand and hold it
depressed.
► Pull the trigger (3) with your index finger and hold it there.
The blower accelerates and air flows from the nozzle.
The air flow rate is controlled by the trigger (3).
English
2
1
2
3
31
.