Removing And Fitting The Battery; Inserting The Battery; Removing The Battery; Switching The Blower On/Off - Stihl BGA 86 Instruction Manual

8 Removing and Fitting the Battery

1
2
► Line up the lug (3) and the slot (2).
► Push nozzle (1) into required position on blower tube (4).
► Rotate nozzle (1) until it engages.
8 Removing and Fitting the Battery
8.1

Inserting the battery

2
► Push battery (1) as far as it will go into the battery
compartment (2).
The battery (1) engages with a click.
8.2

Removing the battery

► Place blower on a level surface.
► Keep one hand in front of the battery compartment so that
the battery (2) cannot fall out.
0458-824-9821-A
3
4
1
► Press both locking levers (1).
The battery (2) is unlocked and can be removed.

9 Switching the Blower On/Off

9.1

Switching On

► Hold the blower with one hand on the control handle -
wrap your thumb around the handle.
► Push the release slide (1) in the direction of the blower
tube with your thumb and hold it there.
► Pull the trigger (2) with your index finger and hold it there.
The blower accelerates and air flows from the nozzle. You
can let go of the release slide (1).
The air flow rate is controlled by the trigger (2).
English
1
2
1
3
2
31