110-Block, Bix Block - Brady BMP 61 User Manual

110-Block, Bix Block

The 110-Block and Bix Block use only the following dedicated label supply types.
• 110-Block: M61C-475-412 or M61C-475-422
• Bix Block: M61C-625-412 or M61C-625-422
The 110-Block label type is based on user-selected pair configurations, with the length of the label
determined by the pair type selected. The label height uses a dedicated 110-Block part height of 0.475
inch. The length of a 110-Block label is 7.5 inches, with a total strip length of 7.9 inches. The number
and formatting of areas is based on pair configuration and serialization selected.
Bix Block template information is similar to the 110-block, with some variations on height and length of
strip. The label height uses a dedicated Bix Block part height of 0.625 inch. The length of a Bix Block
label is 6.2 inches with a total strip length of 6.6 inches.
To use the 110- or Bix Block application:
1. Press Label Type.
2. Select 110-Block or BIX Block.
A dialog box displays requesting further information.
In the 110- and Bix Block applications, the number of areas created is based on the pair
configuration selected. Vertical and horizontal separator lines are automatically added.
®
BMP 61 User's Manual
Label Types
110-Block, Bix Block
76