Brady BMP 61 User Manual page 59

For simple serialization:
3. With the cursor immediately displayed in the Start Value field of Sequence #1, enter the start
value of the sequence.
If the start value is larger than the end value, the series will decrement automatically.
4. In the End Value field, enter the end value of the sequence.
5. In the Increment field, enter the increment value.
6. When ready, select OK.
For multiple serialization, displayed at different locations on the label:
7. Complete Steps 1 through 6 above.
8. On the Editing screen, navigate to the next sequence location (cursor position) on the label.
(Skip this step if creating a compound serialization displaying at the same cursor position.)
9. Press Serial.
The previous serialization values display in the dialog box presented.
10. Navigate to the Add Seq 2 option box and press Enter.
11. In the Sequence #2 enter the start and end values for that sequence, as well as the increment.
For Linked serialization:
Note: Linked serializations do not have to display at the same position on the label. They can be in
separate locations within the label.
12. Tap the Linked option box to activate.
13. Tap OK.
®
BMP 61 User's Manual
Formatting
Serialization
51