Brady BMP 61 User Manual page 105

Problem
Labels Supply
Printer will not feed labels.
Printer will not feed labels.
Label material jams in printer.
Error - "Out of Media"
Error - "Out of Media"
Error - "Out of Media"
Error - "Out of Media"
®
BMP 61 User's Manual
Cause
The leading edge of the label roll
is not inserted up to the black
line under the ribs.
The leading edge of the label roll
is uneven or torn (not a straight
edge).
Last label was not removed.
Label supply is exhausted
Label supply is not installed
correctly. Labels must be
installed so that they are biased
against the front wall of the
lower printer base. Notch
Sensors in the lower printer
base need to detect the
presence of the labels to allow
printer to operate correctly.
Notch sensors in lower printer
frame are dirty. Notch Sensors in
the lower printer base need to
detect the presence of the labels
to allow printer to operate
correctly.
Label supply memory device
has counted down to zero.
Circuit board on the roll holder
core of label supply contains a
memory device that tells the
printer how much unused
material remains. Reuse of the
roll holder with memory device
will eventually count down to
zero and give error
Maintenance and Troubleshooting
Corrective Action
Make sure the leading edge of
the label roll is securely under
the ribs (at least up to the black
line).
Use a pair of scissors to cut a
straight leading edge on the
label roll.
Make sure the last cut label has
been removed from the label
tray.
Replace label supply roll.
Press [CLEAR/ESC] key to clear
error
Reinstall label supply.
Press [CLEAR/ESC] key to clear
error.
(See page 13 for proper
loading.)
Clean sensors in lower printer
base. Press [CLEAR/ESC] key
to clear error.
(See page 83 for proper
cleaning techniques.)
Replace label supply or roll
holder.
Press [CLEAR/ESC] key to clear
error.
Troubleshooting
97