Advertisement
Because it is impossible to anticipate every situation or condition which can occur while riding, this
manual makes no representations about the safe use of bicycles under all conditions. There are risks
associated with the use of any bicycle which cannot be predicted or avoided, and which are the sole
responsibility of the rider. You should save this manual, along with any other documents that were
included with your bicycle, for future reference, however all content in this manual is subject to
change or withdrawal without notice. Visit www.wattwheels.co.nz to download the latest version.
Wattwheels makes every effort to ensure accuracy of its documentation and assumes no
responsibility of liability if any errors or inaccuracies appear within. Assembly and first adjustment of
your Scout Bike requires special tools and skills and it is recommended that this should be done by a
trained bicycle mechanic if possible.
LET'S GET STARTED:
1. COMPLETLEY CHARGE THE BATTERY BEFORE THE FIRST USE
(Red light is on when battery is charging, green when fully charged. Approx. time is around 4-5 hours)
(PLEASE BE CAREFUL NOT TO PRESS THE BRAKES LEVERS WHILE THE FRONT WHEEL IS NOT
INSERTED. DOING SO WILL RESULT IN THE BRAKES PADS CLAMPING TOGETHER, AND YOU WILL NOT
BE ABLE TO INSERT THE FRONT WHEEL WITHOUT BLEEDING THE BRAKES IN WHICH YOU WILL NEED
A BIKE WORKSHOP TO PERFORM)
2. ASSEMBLE THE HANDLEBARS
3. ATTACH THE PEDALS
(Beware: The left-hand pedal has a reverse thread. To tighten, please turn anti-clockwise)
4. ATTACH THE SEAT POST
5. ATTACH THE FRONT MUDGUARD AND ATTACH FRONT LIGHT
6. INSERT THE FRONT WHEEL WITH QUICK RELEASE
7. CHECK ALL SCREWS AND BOLTS ARE TIGHT, SEAT AT CORRECT HEIGHT, GEARS AND BRAKES
CHECKED AND WORKING PROPERLY
Advertisement
