Cleaning & Maintenance; Storage; Troubleshooting - Silk'n FaceTite H2111 User Manual

9. Cleaning & maintenance
Clean Silk'n FaceTite after each treatment.
Never immerse the device or any of its parts in
water!
U
Put the device in standby mode, then unplug it.
U
Use absorbent paper (such as toilet paper or wipes) to
remove the gel residue off the treatment surface (#1).
Make sure you remove all gel residue to prevent the gel
from solidifying or damaging the device.
U
Use a clean damp cloth to clean the device and the
treatment surface (#1). You may use cleaning fluids with
up to 70% alcohol, but never use acetone or other abrasive
liquids, because they will damage your device.
U
Finally, wipe the device and the treatment surface (#1)
dry with a clean dry cloth.

10. Storage

After cleaning we recommend you keep the device in the
storage case. Make sure that the device is completely dry before
storage.

11. Troubleshooting

Do not attempt to open or repair your device. You may exposure
yourself to dangerous electrical components and may cause
serious harm to yourself. It will also void the warranty.
35
EN