Using Anti-Slip Sheets (Optional); Wooden Floors (Suspended Floors) - LG J5 Series Owner's Manual

Using Anti-Slip Sheets
(Optional)
If you install the appliance on a slippery
surface, it may move because of excessive
vibration. Incorrect leveling may cause
malfunction through noise and vibration.
If this occurs, install the anti-slip sheets
under the leveling feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance
in the installation area.
3
Place the adhesive side of the anti-slip sheets
on the floor.
•
It is most effective to install anti-slip sheets
under the front legs. If this seems difficult,
install anti-slip sheets under the rear legs.
This side up
4
Ensure the appliance is level.
•
Push or rock the top edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
•
You can obtain anti-slip sheets (MHK61866301)
from the LG Service Centre.
•
Do not use self-made linings, carpets, etc.
12
Adhesive side
Wooden Floors
(Suspended Floors)
•
Wooden floors are particularly susceptible
to vibration.
•
To prevent vibration we recommend you place
rubber cups at least 15 mm thick of the each foot
of the appliance, secured to at least two floor
beams with screws.
Rubber Cup
•
If possible install the appliance in one of the corners
of the room, where the floor is more stable.
NOTE
•
Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
•
The washing machine must be 100% horizontal
and stand firmly in position.
•
It must not 'Seesaw' across corners under the load.
•
The installation surface must be clean, free from
floor wax and other lubricant coatings.
•
Do not let the feet of the washing machine get wet.
Failure to do so may cause vibration or noise.
•
You can obtain rubber cups (p/no.4620ER4002B)
from the LG Service Centre.
•
Do not use caps (supports) from other manufacturers,
this can lead to increased vibration.
EN