LG J5 Series Owner's Manual page 27

Medic Rinse (
For best results or for cleaner rinsing.
This allows the final rinse to be heated
to 40°C.
1
Press the Power button.
2
Select a programme and press
the Medic Rinse button.
3
Press the Start/Pause button.
Turbo Wash (
Wash cycle in under 1 hour with energy and
water saving. (based on half of laundry)
1
Press the Power button.
2
Select a washing programme.
3
Press the Turbo Wash button.
4
Press the Start/Pause button.
Add Item (
Laundry can be added or removed after
the washing programme is started.
1
Press the Add Item button when the
LED ( ) is turned on.
2
Add or remove laundry.
3
Close the door and Press the
Start/Pause button.
NOTE
•
For safety reasons, the door remains locked
when the water level or temperature is high.
It is not possible to add laundry during this
time.
•
If the water temperature in the drum is high,
wait until it cools down.
CAUTION!
•
When adding laundry, make sure to
completely push it into the drum. If laundry
gets stuck in the door latch hole, the rubber
packing may be damaged, causing water
leakage and malfunction.
•
Forcing the door open may cause part
damage, destruction, or safety problems.
•
If you pressed button Add Item and the
indicator is not active, do not leave the
machine unattended and immediately
continue washing by pressing
the button Start/Pause.
)
)
)
•
If you open the door while there are a lot of suds
and water in the drum, the suds or water may
flow, causing burn injury or wet floor.
Wi-Fi ( )
Set the Wi-Fi connection. When Wi-Fi is connected,
the Wi-Fi icon ( ) on the control panel is lit.
Remote Start (
Use a smart phone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in
the cycle.
NOTE
•
You must first connect to a gateway and register
your appliance in order to use the Remote Start
function. (Refer to 'SMART FUNCTIONS').
To Use Remote Start:
1
Press the Power button.
2
Put the laundry in drum.
3
Press and hold Remote Start button
for 3 seconds to enable Remote Start function.
4
Start a cycle from the LG Smart ThinQ
application on your smart phone.
NOTE
•
If you do not start your appliance, it will wait to
start a cycle until you turn off your appliance from
the application or disable the Remote Start
function.
•
When Remote Start is turned on, the door is
automatically locked.
To Disable Remote Start:
When the Remote Start is activated, press and
hold Remote Start button for 3 seconds.
NOTE
•
When the Remote Start is activated, press and
hold Remote Start button for 3 seconds.
EN
)
27