Selecting Nav Units; Selecting The North Reference; Setting The Backlight Timer - Magellan Meridian Series User Manual

Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/MPH,
NM/Knots or KM/KPH.
From
Any
Screen
Default: Miles/MPH
Selecting the North Reference — Allows the selection of whether the
Meridian uses True North, Magnetic North, Military True or Military
Magnetic as its North reference.
From
Any
Screen
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
From
Any
Screen
Default: 4 Minutes
Magellan Meridian GPS Receiver
Highlight
MENU
Setup
Select ENTER
Nav Units
Highlight
MENU
Setup
Select
ENTER
North
Reference
Highlight
MENU
Setup
Select
ENTER
Timer
Duration
Highlight
ENTER
Nav Units
Highlight
ENTER
North Reference
Highlight
ENTER
Light Timer
Reference
ENTER
ENTER
ENTER
55