Activating/Deactivating A Route; Viewing A Route; Editing A Route - Magellan Meridian Series User Manual

Activating/Deactivating a Route — Enables the activating or deactivating
of a stored route. When a route is being used to navigate, it is termed to
be "active". When you want to use a route to navigate with, follow these
steps to activate it.
From
Any
Screen
(Note: If the route is active, the Meridian will automatically display
"Deactivate Route" in the menu and inversely if the route is not active,
"Activate Route" will be displayed.)
Viewing a Route — Allows you to view the legs of a route using the same
screen that was used to create the route. Viewing a route can be used if
you just wanted to see the components of the route or as a precursor to
editing the route.
From
Any
Screen
Editing a Route — Enables you to modify an existing route by inserting a
leg, deleting a leg or replacing a leg. Follow the instructions above for
Viewing a Route and then use the instructions for inserting, deleting,
replacing or appending a leg as appropriate.
When you are done with editing the route, use the Up/Down arrows to
highlight the "Save Route" button and press ENTER.
Magellan Meridian GPS Receiver
Highlight
MENU
Routes
Highlight
ENTER
Activate
or
Deactivate
Highlight
MENU
Routes
Highlight
ENTER
Map View
ENTER Select MENU
Route
Select
ENTER
Route
Reference
MENU
49