Selecting Nav Units; Selecting The North Reference; Setting The Backlight Timer - Magellan 330 Series User Manual

Reference
Reference
Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/MPH,
NM/Knots or KM/KPH.
From
Any
Screen
Default: Miles/MPH
Selecting the North Reference — Allows the selection of whether the MAP
330 uses True North or Magnetic North as its North reference.
From
Any
Screen
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
From
Any
Screen
Default: 4 Minutes
54
Highlight
Setup
Select
Nav Units
Highlight
Setup
Select
North
Reference
Highlight
Setup
Select
Timer
Duration
Highlight
Nav Units
Highlight
North Reference
Highlight
Light Timer
Magellan MAP 330 GPS Receiver