Selecting Nav Units; Selecting The North Reference; Setting The Backlight Timer - Magellan Meridian Series User Manual

Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/MPH,
NM/Knots or KM/KPH.
Default: Miles/MPH
Selecting the North Reference — Allows the selection of whether the
Meridian uses True North or Magnetic North as its North reference.
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
Default: 4 Minutes
Magellan Meridian GPS Receiver
MENU
Setup
ENTER
MENU
Setup
ENTER
MENU
Setup
ENTER
ENTER
Nav Units
ENTER
North Reference
ENTER
Light Timer
Reference
ENTER
ENTER
ENTER
55