Accessing The Navigation Screens; Saving A Waypoint - Magellan Meridian Series User Manual

From any screen other than a navigation screen, pressing [NAV] returns you
to the last navigation screen viewed. Note that if you are inputting data,
pressing [NAV] will return you to the last navigation screen but your inputs
will not be saved.
A waypoint is a point on a map that you can name and save in the Meridian.
They are primarily used for creating routes. Whether the route is a simple
GOTO or a more complex multileg route, it needs stored waypoints to use
as its starting and destination point.
Saving a Waypoint with a Receiver-Generated Name
From any screen, press and hold [GOTO] for 2
seconds and the Mark screen is displayed.
The "Save" button is highlighted and you can
press [ENTER] to save the waypoint using the
default name and icon.
You can later go back and edit any of the
waypoint information through the Database
Menu or you can change the information now
following the guidelines below. (See Waypoints in
the Reference chapter of the User Manual.)
Saving a Waypoint with a User-Input Icon and Name
From any screen, press and hold [GOTO] for 2
seconds. Use the UP/DOWN arrows and notice
that the highlight moves from field to field and
then back to "Save."
Highlight the Icon field using the UP/DOWN
arrows. Press [ENTER].
12
Magellan Meridian GPS Receiver