Advertisement
1
t
t
4
Remove transit cap from soap cartridge
Make sure pump is pushed in/down
SOAP DISP E N SE R I NS TAL L AT I O N I N S T R U C T I O N S
2
Products arrives locked,
use key and push button
Make sure
open
dispenser is level
Fixing set
5
Locate cartridge with key into chassis housing.
3
8" / 205mm minimum
6
Use paper image on the
back of this page to
mark holes
Drill holes or used existing ones to fix
Close dispenser face and activate until product
dispenses to ensure pump is primed.
x 4
x 4
X5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dolphin Excel
Summary of Contents for Dolphin Excel
- Page 1 Use paper image on the back of this page to mark holes Products arrives locked, use key and push button Make sure open dispenser is level 8” / 205mm minimum Fixing set Drill holes or used existing ones to fix Close dispenser face and activate until product Remove transit cap from soap cartridge Locate cartridge with key into chassis housing.
- Page 2 CLE AN IN G AN D MAIN T E N AN CE PRE CAUTION S Clean exterior surfaces of the dispenser using 1. It is the installer’s responsibility to ensure 3. Do not install where failure of the mounting warm water and mild soap. DO NOT USE installation of unit comples with all applicable system or dripping of product from hands may ABRASIVE CLEANSERS.
Need help?
Do you have a question about the Excel and is the answer not in the manual?
Questions and answers