Download Print this page

Unpacking; Maintenance - Nu-Vu NCOT5 Manual

Half-size

Advertisement

UNPACKING -

Examine the interior of the unit to make sure all packing materials are removed before the unit is
plugged into an electrical outlet. Examine the interior and exterior to determine whether any
damage was incurred during delivery. If so, notify the carrier immediately to file a damage
claim. All Nu-Vu equipment is carefully tested and inspected prior to shipment. When accepted
for delivery by carrier, the responsibility for safe arrival at the destination is assumed by the
carrier.
CAUTION:
Should any damage be found, do not attempt to operate the unit. Call your dealer immediately
to arrange for service.

MAINTENANCE -

The equipment has been designed to require minimum maintenance and has been constructed to
meet industry electrical safety and sanitation standards.
Non-toxic chemical cleaners or mild detergents are recommended for cleaning of fixtures. Do
not use steel wool of any kind. Steel wool particles will work into the grains of the metal causing
corrosion. Also, these particles can cause a health hazard. Should scouring be required, use a
non-abrasive type of cleaner. Do not use caustic solutions on your equipment. Hosing or
steaming should not be necessary to keep these fixtures clean and sanitary. Do not allow water
or steam to come into contact with electrical components.
CAUTION:
Be sure to disconnect power source and allow oven to cool before cleaning and servicing the
unit. Liability for improper or careless use is the responsibility of the equipment owner or
persons servicing the unit, including the authorized service agent.
PAGE 1

Advertisement

loading