IBM Power System 8247-42L Manual page 88

b. Remove the front inner guide by carefully prying the top, side, and bottom edges away from the
sheetmetal opening with a flat blade screwdriver. Pull the guide out of the opening, and lift out
of the system, as shown in Figure 68.
Figure 68. Removing the front inner guide
c. Remove the front baffle bracket by pushing the bracket through the hole (A) in the sheetmetal
with a screwdriver, then slide the bracket to left and pull the bracket away from the sheetmetal,
as shown in Figure 69 on page 71.
70
System backplane