IBM Power System 8247-42L Manual page 106

B
C
A
Figure 89. Lowering the removal tool onto the system processor module
c. With the removal tool (A) sitting on top of the system processor module, push down on the tool
to lock the system processor module into the tool, as shown in Figure 90 on page 89. Make sure
that both of the tool jaws are locked on the system processor module. Do not press the blue
release tabs until directed to do so later.
Note: The tool drops slightly when you push the tool down so that the jaws can grab the bottom
of the system processor module.
88
System backplane
B
C