Kohler REVIVAL Series Installation Instructions Manual

1. BEFORE YOU BEGIN

HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will aid you in avoiding the
unnecessary expense
Installation. In addition to proper installation, read all
operating and safety instructions.
MODEL NUMBERS
S
K-T16119
S
K-T16122
S
K-T16124

PRODUCT REQUIREMENTS

S
Deep rough-in kit #73444 allows an additional 1/2"
(1.3cm) of tile thickness.
S
Plaster guard diameters are approximately 1-5/8"
(4.1cm) for the valve and 7/8" (2.2cm) for the spout.
S
Installer-supplied copper tubing to be: 5/8" O.D.
(1/2" nominal).
S
Install water hammer arrestors in supply lines near
the valves.

TOOLS AND MATERIALS REQUIRED

S
Open end/adjustable wrenches
S
Adjustable arc pliers
S
1/2" Nom. (5.8" O.D.) tubing
S
Tubing Cutter
S
Hole cutting equipment
S
Soldering equipment and supplies
S
Phillips screwdriver
Roughing-In Dimensions – SPOUT AND HANDLES
9-5/8" (24.4cm)
1-3/4"
(4.4cm)
4-3/4"
(12.1cm)
2-5/8" (6.7cm) D.
DECK-MOUNT
4-1/4"
(10.8cm)
3"
(7.6cm)
BB
113341-2-
DECK-/BATH-MOUNT BATH FAUCET
R
associated with improper
1-5/8" (4.1cm)
6-1/4" (15.9cm)
(scroll knob)
6" (15.2cm)
(traditional knob)
1" (2.5cm) 3" (7.6cm)
4-1/4"
(10.8cm)
2-1/2" (6.4cm) D.
LEVER
All information in these instructions is based on the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time
without notice.
S
S
S

INSTALLER INFORMATION

S
These instructions
installation: installation on finished deck or bath
rim, and installation on rough (unfinished) deck (to
be covered later with tile or other finish material).
S
Leave protective sleeve on spout supply tube until
spout installation. This is an O-Ring sealing surface
which may be damaged when unprotected.
S
Finish deck material must fit closely to the
diameters of the plaster guards, especially the
spout plaster guard.
S
Provide an access panel to valves from underside
of deck.
6-5/8" (16.8cm)
1-1/8"
(2.9cm)
4-3/8"
2-5/8" (6.7cm) D.
(11.1cm)
BATH-MOUNT
1" (2.5cm)
2-1/2" (6.4cm)
1" (2.5cm)
1-1/4"
3" (7.6cm)
(3.2cm)
2-1/2" (6.4cm) D.
DOME
Fig. #1
REVIVAL
K-T16119M
K-T16122M
K-T16124M
cover two methods
1-5/8" (4.1cm)
6-1/4" (15.9cm)
(scroll knob)
6" (15.2cm)
(traditional knob)
3" (7.6cm)
2-1/2" (6.4cm) D.
TRADITIONAL
E2000 Kohler Co.
of