Cisco Ubr7200 Series Routers-Installing A Port Adapter - Cisco PA-4E1G Series Installation And Configuration Manual

Chapter 3 Removing and Installing Port Adapters
Port Adapter Removal and Installation
Cisco uBR7200 Series Routers—Installing a Port Adapter
Step 1
Metal carrier
To insert the port adapter, carefully
align the port adapter carrier
between the upper and the lower
edges of the port adapter slot.
Inside
slot guide
PC board
Step 2
Carefully slide the new port adapter
halfway into the port adapter slot.
Step 3
With the port adapter halfway into
the slot, connect all required cables
to the port adapter. After connecting
all required cables, carefully slide
the port adapter all the way into the
slot until the port adapter is seated in
the router midplane.
Step 4
After the port adapter is properly
seated, lock the port adapter lever or
retention clip, depending on your
system. (See illustration on
preceding page.)
PA-4E1G Serial Port Adapter Installation and Configuration
3-7
OL-3065-05