ABB Welcome M22344-W Manual page 4

®
ABB Welcome
Fig. 1 Control elements
No. Functions
1 4.3" Color display
2 Communication button
2A For incoming call, press this button within 30 seconds to activate
communication, and press it again to end the call.
2B In standby mode, press this button to enter the communication menu.
If the LED flashes slowly, this indicates an incoming call.
If the LED illuminates, this indicates that a conversation is in progress.
If the LED flashes rapidly, it indicates the system is busy.
3 Unlock button
3A Press this button to open the door at any time.
4 Surveillance button
4A In standby mode, press this button to survey the default outdoor station.
4B While the display is on, press this button to survey the next outdoor
station. (Availability of this function depends on the installation type.)
4C While the display is on, hold this button to take a snapshot.
4D In standby mode, if the LED flashes, press this button to display the
"History" record. If the LED flashes slowly, this represents a notification
of a missed call.
5 Mute button
5A In standby mode, press this button to mute ringtone of the indoor
station.
5B In standby mode, hold the button to mute ringtone of all indoor stations
in the apartment.
5C Press this button to reject incoming call.
5D During the conversation, press this button to mute microphone.
The LED illuminates to indicate mute status.
6 Programmable button 1
6A Release the second lock connected with an outdoor station (default
function).
6B *Programmable button for additional functions, e.g., call to guard unit.
7 System setting button
Enter the system setting menu for various functions of the device.
If the LED flashes rapidly, it means that setting is busy.
*For use of these buttons, please contact your electrical installer.
— 4 —