Selecting Or Deselecting A Plot - Texas Instruments TITANIUM TI-89 User Manual

• Plots defined with column numbers always use the last data variable in the
Data/Matrix Editor, even if that variable was not used to create the definition.
• To use an existing list variable for x, y, Freq, or Category, type the list name instead
of the column number.
• An example using Freq, Category, and Include Categories is available.
5. Press ¸ (after typing in an input box, press ¸ twice).
The
Plot Setup
The plot you just defined is automatically
selected for graphing.
Notice the shorthand definition for the
plot.
Any undefined data points (shown as
Note:

Selecting or Deselecting a Plot

Selecting or Deselecting a Plot
Selecting or Deselecting a Plot Selecting or Deselecting a Plot
From Plot Setup, highlight the plot and press † to toggle it on or off. If a stat plot is
selected, it remains selected when you:
• Change the graph mode. (Stat plots are not graphed in 3D mode.)
Statistics and Data Plots
screen is redisplayed.
Plot Type = Scatter
Mark = Box
x = c1 y = c2
) are ignored in a stat plot.
undef
553