Drawing A Circle - Texas Instruments TITANIUM TI-89 User Manual

2. Move the cursor to the 1st point, and press ¸.
3. Move to the 2nd point, and press ¸. (As you move, a line extends from the 1st
point to the cursor.)
Use 2 to move the cursor in larger increments; 2 B, etc.
Note:
After drawing the line, you are still in
mode.
• To continue drawing another line, move
the cursor to a new 1st point.
To quit, press N.
•

Drawing a Circle

Drawing a Circle Drawing a Circle Drawing a Circle
From the Graph screen:
1. 2 ‰
and select
4:Circle
2. Move the cursor to the center of the circle,
and press ¸.
3. Move the cursor to set the radius, and
press ¸.
Use 2 to move the cursor in larger increments; 2 B, etc.
Note:
Additional Graphing Topics
Line
.
493