Getting Input From The User And Displaying Output; F3 I/O Toolbar Menu - Texas Instruments TITANIUM TI-89 User Manual

1. Position the cursor where you want to insert the
2. Press:
2 ˆ to display a list of modes.
The
Note: Mode
the
Current Folder
mode, use the
3. Select a mode to display a menu of its valid settings.
4. Select a setting.
The correct syntax is
inserted into your program.

Getting Input from the User and Displaying Output

Getting Input from the User and Displaying Output Getting Input from the User and Displaying Output Getting Input from the User and Displaying Output
Although values can be built into a program (or stored to variables in advance), a
program can prompt the user to enter information while the program is running.
Likewise, a program can display information such as the result of a calculation.

F3 I/O Toolbar Menu

F3 I/O Toolbar Menu F3 I/O Toolbar Menu F3 I/O Toolbar Menu
To enter most of the commonly used
input/output commands, use the Program
Editor's ...
toolbar menu.
I/O
Programming
menu does not let you set
mode. To set this
command.
setFold
:setMode("Graph","FUNCTION")
command.
setMode
618