Intended use Your BLACK+DECKER BCF611C screwdriver has been designed for screwdriving applications. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
Page 3
(Original instructions) ENGLISH 1. Work area safety d. Remove any adjusting key or wrench before turning a. Keep work area clean and well lit. Cluttered or dark the power tool on. A wrench or a key left attached to a areas invite accidents.
Page 4
ENGLISH (Original instructions) h. Keep handles and grasping surfaces dry, clean and Even with the application of the relevant safety regulations free from oil and grease. Slippery handles and grasping and the implementation of safety devices, certain residual surfaces do not allow for safe handling and control of the risks can not be avoided.
7. USB connector 8. Bit storage Maintenance 9. Case Your BLACK+DECKER tool has been designed to operate 10. Case insert over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool Charging the battery (fig. A, B) care and regular cleaning.
ENGLISH (Original instructions) Regularly clean the motor housing using a damp cloth. Do These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact Black & not use any abrasive or solvent-based cleaner. Decker at the following address or refer to the back of the Protecting the environment manual.