Adjusting The Lens Position - Hitachi 8000 Series User Manual

Operating
ZOOM / FOCUS button
Adjusting the lens
Adjusting the zoom and focus
The ZOOM or FOCUS dialog will appear when you
press any of the buttons from ZOOM, ZOOM -,
ZOOM +, FOCUS + and FOCUS -.
1.
Use the ZOOM + / - buttons on the remote
control or ZOOM button and ◄/► cursor buttons
on the projector to adjust the screen size.
2.
Use the FOCUS + / - buttons to focus the picture.
NOTE
• The projector may ignore operation by
other buttons while the lens is moving.
LENS SHIFT button

Adjusting the lens position

Press the LENS SHIFT button. The LENS SHIFT
dialog will appear. Using the ▲/▼/◄/►buttons while
the dialog is displayed shifts the lens. Generally, better
image quality can be got when the lens is set to the
center.
Press the LENS SHIFT button again to exit the
LENS SHIFT function.
CENTERING
Press the ENTER or INPUT button while the dialog is
displayed to execute the CENTERING feature, which
adjusts the lens to the center. A message dialog is dis-
played for confirmation. Pressing the ►button performs
CENTERING. You can also perform CENTERING in the
standby mode by pressing the FUNCTION and LENS
SHIFT buttons on the control panel for 3 seconds at the
same time.
CAUTION
moving lens could catch them in the space around the lens and result in an injury.
14
►Do not put your fingers or any other things around the lens. The
Remote control
LENS SHIFT button
ZOOM + / - buttons
FOCUS + / - buttons
LENS SHIFT
button
ZOOM button
FOCUS - / + FUNCTION
buttons button