Adjusting The Projector's Elevator; Adjusting The Lens Position - Hitachi CP-WU9100 User Manual

Adjusting the projector's elevator

Lengthening or shortening the
length of the elevator feet shifts
the projection position and the
projection angle.
Turn the elevator feet each to
adjust their length.
max. 30 mm
WARNING ►Do not lengthen the elevator feet exceeding 30 mm. The foot
lengthened exceeding the limit may come off and drop the projector down, and
result in an injury or damaging the projector.
CAUTION ►Do not place the projector with an inclination exceeding
5 degrees. The projector leaned exceeding the limit could cause malfunction
and shorten the life of the projector.

Adjusting the lens position

Shifting the lens position shifts the projection position.
After pressing the LENS SHIFT button on the control panel or the remote control,
use the cursor buttons to shift the lens position.
CAUTION ►Do not put your fi ngers or any other things around the lens. The
moving lens could catch them in the space around the lens and result in an injury.
NOTE • Operations from any button are not available, while the lens is moving.
• Generally, better image quality is achieved when the lens is set to the center.
LENS SHIFT button
LENS SHIFT
button
5°
11