Turning On The Power; Turning Off The Power - Hitachi 8000 Series User Manual

Power on/off button

Turning on the power

1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
2.
Make sure that the POWER indicator is
lighted in steady orange (User's Manual
(detailed)120). Then remove the lens
cover.
3.
Press STANDBY/ON button on the projector
or the ON button on the remote control.
The projection lamp will light up and POWER indicator will begin blinking in
green. When the power is completely on, the indicator will stop blinking and
light in steady green (User's Manual (detailed)120).
To display the picture, select an input signal according to the section Selecting an
input signal (User's Manual (detailed)26).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON or STANDBY button again while the message
appears.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (User's Manual (detailed)120).
3.
Attach the lens cover, after the POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
2
►A strong light is emitted when the projector's power is on.
POWER indicator
STANDBY button
ON button
STANDBY/ON button
Remote control