Standard Accessories; Battery Removal/Installation - Hitachi CS 36DL Handling Instructions Manual

English
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Charger (UC36YRSL)
2 Battery (BSL3620)
3 Battery cover
4 Chain case
5 File set
6 Oil feeder
7 Hexagonal bar wrench
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
○ Battery
(BSL3620)
○ Back pack power supply
(BL36200)
Before
charging
While
The
charging
pilot lamp
lights or
Charging
blinks in
complete
red.
Charging
impossible
The
pilot lamp Overheat
lights in standby
green.
66
UC36YRSL
14.4 V – 36 V
0.7 kg
CS36DL
LBR NN
1
1
1
1
1
2
1
(BSL3626)
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Blinks
Lights continuously
Lights
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Blinks
Lights for 0.1 seconds. Does not light for 0.1
seconds. (off for 0.1 seconds)
Flickers
Lights continuously
Lights
NOTE
For details of the operations, please see the BL36200
instruction manual.
○ Chain oil
○ Depth gage jointer
Optional accessories are subject to change without notice.
APPLICATIONS
○ Cutting of timber/logs
○ Pruning, felling of garden trees
-

BATTERY REMOVAL/INSTALLATION

-
- 1. Battery removal
Hold the housing tightly and push the battery latches to
1
remove the battery (see Fig. 3).
1 CAUTION
Never short-circuit the battery.
2
2. Battery installation
1 Insert the battery while observing its polarities (see Fig.
3).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in Fig. 4, 5.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
Table 1
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).