Table of Contents
Advertisement
5. M
AINTENANCE
Product
Maintenance
Page 18 of 21
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and/or mechanical wear. To maintain optimum
performance and minimize wear, clean your lighting products at least twice a month.
However, be aware that usage and environmental conditions could necessitate more
frequent cleanings.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
4.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
5.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6.
Softly drag any dirt or grime to the outside of the transparent surface.
7.
Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
COLORband H9 USB User Manual Rev. 2
Advertisement
Table of Contents
