Single Beltpack To Single Beltpack System - Telex RadioCom BTR-500/600C Operating Instructions Manual

Beltpack to Beltpack System
The following is an example of a beltpack to
beltpack system. The two operators need to be in
constant, full-duplex communication with each
other in a noisy paper press environment.

Single Beltpack to Single Beltpack System

RF TX = FREQ 1
RF RX = FREQ 2
T
elex
Example of a TR-500 System used at a Publishing Firm
Figure 51
-29-
RF TX = FREQ 2
RF RX = FREQ 1
T
elex