Manual Operation (Without Remote) - Electrolux EPN12V78HW User Manual

Sleep Operation
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control.
Activate the sleep feature when you
are ready to go to sleep. When in
COOL mode, the unit will increase the
temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode,
the unit will decrease the temperature by
1°C (2°F) after 1 hour, and will decrease
an additional 1°C (2°F) after another
hour. And the fan speed is low.

3. MANUAL OPERATION (WITHOUT REMOTE)

How to operate your unit
without the remote control
In the event that your remote control
fails to work, your unit can be operated
manually with the MANUAL CONTROL
button located on the indoor unit. Note
that manual operation is not a long-
term solution, and that operating the
unit with your remote control is strongly
recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual
operation.
To operate your unit manually:
1. Lift the front panel of the indoor unit,
and raise it until it clicks in place.
2. Locate the MANUAL CONTROL
button on the right-hand side of the
display box.
3. Press the MANUAL CONTROL
button one time to activate FORCED
AUTO mode.
4. Press the MANUAL CONTROL
button again to activate FORCED
COOLING mode.
It will hold the new temperature for
6 hours, then the sleep operation stops,
the unit will revert back to the previous
operation mode, but the temperature will
not change.
Note: The SLEEP function is not
available in FAN or DRY mode.
SLEEP Operation
+/- 1°C/2°F
Set
temperature
1hr
Saving energy during sleep
5. Press the MANUAL CONTROL
button a third time to turn the unit off.
6. Close the front panel.
CAUTION!
The manual button is intended for testing
purposes and emergency operation
only. Please do not use this function
unless the remote control is lost and it is
absolutely necessary. To restore regular
operation, use the remote control to
activate the unit.
AUTO/COOL
ENGLISH
+/- 1°C/2°F
8 hours cancel
1hr sleep operation
Manual control button
9