Operating Temperature; Manual Operation - Electrolux Kelvinator KSV Series User Manual

OPERATING INSTRUCTIONS

Operating temperature

Mode
Temperature
Room temperature
Outdoor temperature
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection
features may come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please set the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperatures.

Manual operation

Units are equipped with a switch to active manual operation mode. This switch can be used as
a back-up to turn the unit on and off if the remote control is lost or fails to operate.
Front panel
Manual control button
Cooling operation
17 C ~ 32 C
18 C ~ 50 C
AUTO/COOL
Heating operation
17 C ~ 27 C
-15 C ~ 34 C
Grasp and lift the front panel up to an angle
1
until it remains fixed with a clicking sound.
Push the button until the AUTO indicator
2
is lit, the unit will work in forced AUTO
mode (the default setting temperature
is 24 ).
Close the panel firmly to its original
3
position.
CAUTION:
Once you push the manual button, the
operation mode is shifted in the following
order: AUTO, COOL, then OFF.
Push the button twice, the unit will operate
in forced COOL mode.
On the third press the unit will turn OFF and
cease operation
The forced COOL mode is used for testing
purposes.
To return to the remote controller operation,
use the remote controller directly.
8
Drying operation
10 C ~ 23 C
10 C ~ 50 C