Installation; 1File Services; 1Introduction To Image Files; 2Load File Set Up - Barco Solaris LC40 R9004120 Owner's Manual

6. Press ENTER to activate.
A slider bar will be displayed with the actual backlight level filled out.
7. Use ↑ or ↓ to adjust the backlight level to desired level.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings

Installation

Service
Back
Menu 10-18
10.7 Installation
Overview
• File Services
• When no Signal
10.7.1 File Services
10.7.1.1 Introduction to image files
Introduction
An image file contains the main characteristics of a source (number of active lines,...). The displays's memory contains a list of files
corresponding to the most common sources, these are the standard files (file extension= *.s). When a new source corresponds to
one of these files, a custom file (file extension=*.C) is created and saved for future use.
The maximum number of custom files that can be created is 63, the four last files are systematically overwritten.
When there is a little difference, the file can also be loaded and then edited until the source specs are reached.
The Load Automatic function creates automatically the best suited image file (custom file) for a new source.
Possible file manipulations
The possible file manipulations are :
• Load : installation of a file for a new source
10.7.1.2 Load file set up
About load file
With load file, a file containing source specific settings for that source, will be loaded. This load file can be done automatically by the
system or manually by the user. When done automatically, the file which corresponds the best with the input source will be loaded.
The priority will be given to a custom file. If no custom file is found, a standard file will be loaded.
How to set the load file property ?
1. Select Advanced Settings.
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 10-20)
3. Select Installation.
4. Press ENTER to activate.
The Installation menu will be displayed. (menu 10-21)
R5976672 SOLARIS LC40 01122003
Display Settings
Rotate : landscape
Backlight
Back
Menu 10-19
10. Advanced Settings
61