Barco Solaris LC40 R9004120 Owner's Manual page 67

When no signal set up
1. Select Advanced Settings.
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 10-27)
3. Select Installation.
4. Press ENTER to activate.
The Installation menu will be displayed. (menu 10-28)
5. Select When no signal.
6. Press ENTER to activate.
The When no signal menu will be displayed. (menu 10-29)
7. Select Standby [off] or Standby [on] and press ENTER to toggle the When no display setting.
off when no input signal, the display stay on.
on
when no input signal, the display goes to standby when the time installed in Delay is past.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings
Installation
Service
Back
Menu 10-27
Delay set up
When no signal is Standby [on]:
1. Select Delay. (menu 10-30)
2. Press ENTER to activate.
The delay entering menu appears. (menu 10-31)
The first digit is highlighted.
3. Enter a new delay time with the digit keys on your RCU
Or,
turn the thumb wheel to change the first digit. Press the thumb wheel to enter the selected value and to jump to the next digit.
Handle in the same way for the second digit.
When no signal
Standby : [off]
Delay (min) : 5
Back
Menu 10-30
R5976672 SOLARIS LC40 01122003
Installation
File Service
When no signal
OSD configuration
Back
Menu 10-28
Shutdown delay
Enter new value
05
Menu 10-31
When no signal
Standby : [off]
Delay (min) : 5
Back
Menu 10-29
10. Advanced Settings
63