Switching On/Off - Barco Solaris LC40 R9004120 Owner's Manual

4. Getting Started
Ref. Function
5 Digit buttons
6 RC operation indication
7 Function keys
8 EXIT button
9 ENTER button
10 TEXT
11 FREEZE
12 * Button
13 Picture controls
Table 4-1

4.2 Switching ON/OFF

Main power up
1. When the Solaris LC40 was switched off when it was in standby, it will start up in standby. Continue with the standby procedure.
2. When the Solaris LC40 was displaying an image when switched off, it will start on the same source as it was playing on.
From standby to a real image with the RCU
1. Press the standby key, the same source will be displayed as before the Solaris LC40 went in standby
Or,
press the digit number of the source you want to display.
From standby to a real image with the thumb wheel
1. Press once on the thumb wheel, the same source will be displayed as before the Solaris LC40 went in standby.
Switching to Standby with the RCU
1. Press the standby button on the RCU.
The last used source will be stored to start up on that source.
24
Description
Allows to directly select sources.
• 1. Video
• 2. configurable input 2
• 3. S-Video
• 4. Optional input
• 5. SDI
• 6. RGB
• 7. DVI
• 8. Compact PC
Lights up when a button on the remote control is pressed (Visual indication of remote
control operation – Battery check).
The function keys are reserved for picture in picture (PIP) functionality.
To go up one step in the menu structure.
To enter the adjustment menus or to confirm an adjustment with the adjustment
menus.
When text is on, press TEXT to switch off OSD display. Press TEXT again, OSD
appears as defined in the OSD configuration window.
Press to freeze the image
Aspect ratio toggle button for the actual image
Allow to optimize the picture reproduction
R5976672 SOLARIS LC40 01122003