Recovery Of Boot Rom Password - NEC QX-S5526P Installation Manual

Installation Guide
QX-S5500 Series Ethernet Switches
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Step2: Select "7" in the Boot Menu, and then press <Enter>.
Enter your choice(0-9): 7
The current setting will boot with current configuration file when rebooted.
Are you sure you want to skip current configuration file when reboot? Yes or No
[Y/N] y
Setting......done!
Software of Version 5.4.12 or later version:
BOOT
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Reserved
9. Set switch startup mode
0. Reboot
Ctrl+F: Format File System
Ctrl+D: Enter Debugging Mode
Ctrl+T: Enter Board Test Environment
Enter your choice(0-9):
Software of Version 5.4.8 or previous version:
BOOT
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Select "0" in the Boot Menu, and then press <Enter> to restart the switch. When starting,
you can access the switch without passwords by not reading the current configuration file.

7.3.2 Recovery of Boot ROM password.

Please contact a marketing staff.
MENU
MENU
7 Maintenance and Troubleshooting
7-3