Panel Views; Qx-S5526P Panel Views - NEC QX-S5526P Installation Manual

Installation Guide
QX-S5500 Series Ethernet Switches
Item
Power consumption
(full load)
Cooling system
Operating temperature
Relative humidity
(noncondensing)
 NOTE:
2-ports 10GBASE-T interface module (LSPM3XGT2P) is being supported with after software including

Version 5.4.12 or later version.
There are PSR150-A1 and PSR150-A in AC power supply module. There are PSR150-D1 and PSR150-D

in DC power supply module. It's different in a name of product depending on shipment time but same as
power supply module.
A cable length of DC power supply module changes it to 3m from 2m more than 2014 years.


1.2 Panel views

1.2.1 QX-S5526P panel views

I. Front panel
(1) 10/100/1000BASE-T auto-sensing Ethernet port
(3) 100/1000BASE-X SFP Combo port
(5) Console port
(7) Port mode LED (Mode)
QX-S5526P-D
Rated voltage range: - 48 VDC to - 60 VDC
-48V DC
Input voltage range: - 36 VDC to - 72 VDC
QX-PS800 is supported.
RPS
Input voltage range: 10.8 to 13.2VDC
105 W
4 fans
0°C to 45°C
10% to 90%
Figure 1-1 QX-S5526P front panel
QX-S5526P QX-S5550P
110 W 155 W
(2) 10/100/1000BASE-T auto-sensing Ethernet port status LED
(4) 100/1000BASE-X SFP Combo port status LED
(6) Seven-segment LED
(8) System status LED (PWR)
1-2
1 Product overview
QX-S5526T
115 W
6 fans (4 for the system,
and 1 for each power
module)