Grounding The Grounding Cable; Connecting The Console Cable; Console Cable - NEC QX-S5526P Installation Manual

Installation Guide
QX-S5500 Series Ethernet Switches
(1) Power cable fixed screw
(4) G : -48V Earth

3.2.3 Grounding the Grounding Cable

WARNING:
Correctly connecting the switch grounding cable is crucial to lightning protection and EMI protection.
The power input end of the switch is connected with a noise filter, whose central ground is
directly connected to the chassis, forming the so-called chassis ground (commonly known
as PGND). This chassis ground must be securely connected to the earth so that the
faradism and leakage electricity can be safely released to the earth, enhancing the EMS
capability of the switch.
You can ground the switch by burying the grounding body into the earth. Landing resistance
has to satisfy A kind landing (10 ohms) or D kind landing (100 ohms). When switch install to
19-inch standard cabinet based, ground a chassis appropriately.

3.3 Connecting the Console Cable

3.3.1 Console Cable

A console cable is an 8-core shielded cable. One end of the cable is a crimped RJ-45
connector, which is connected to the console port of the switch, and the other end is a DB-9
female connector, which is connected to the serial port on the console terminal, as shown
below.
Figure 3-5 Connecting point of DC power cord
(2)
(2) The power supply handle
(5) -48 : -48
3-5
3 Installing the Switch
(4)
(5)
(6)
(1)
(3) Power module fixed screw
(6) NULL : Reserved
(3)