NEC QX-S5526P Installation Manual page 79

Installation Guide
QX-S5500 Series Ethernet Switches
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Select "7" in the Boot Menu, and then press <Enter>
When indicating "The current setting is skipping configuration file when reboot.", startup
configuration file is default. It isn't possible to read preserved configuration. please change
the setting. Enter your "N" at the prompt.
Enter your choice(0-9): 7
The current setting is skipping configuration file when reboot.
Are you sure you want to skip current configuration file when reboot? Yes or No
[Y/N] n
Setting......done!
Confirm that the setting was changed.
Enter your choice(0-9): 7
The current setting will boot with current configuration file when rebooted.
Are you sure you want to skip current configuration file when reboot? Yes or No
[Y/N] n
Software of Version 5.4.12 or later version:
BOOT
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Reserved
9. Set switch startup mode
0. Reboot
Ctrl+F: Format File System
Ctrl+D: Enter Debugging Mode
Ctrl+T: Enter Board Test Environment
Enter your choice(0-9):
Software of Version 5.4.8 or previous version:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
MENU
7 Maintenance and Troubleshooting
7-5