Table of Contents
Advertisement
2.3
5.25" D
I
EVICE
1. In your tool bag, find one of the black screws and attach one to your 5.25" device at the right
upper side.
2. While facing the front of the case, insert your 5.25" device into the slot in the Component Tray
until it locks into position.
Note: It may be necessary to remove the side screens as detailed in section 2.5 to effectively
route cables to your device. Pause when the device is halfway inserted, connect the
power and data cabling, and then complete installing the device.
2.4
2.5" D
I
EVICE
NTERNAL
Your Mini Skeleton case has the ability to mount 2.5" hard drive devices vertically inside the
frame for convenient storage capacity.
1. In your tool bag, find one of the black screws and attach one to your 2.5" device at the front
screw holes.
2. While facing the front of the case, position the 2.5" device vertically and slide it into one of the
2.5" HDD mounting slots in the Component Tray until it locks into position (make sure the black
screw faces up).
Note: It may be necessary to remove the side screens as detailed in section 2.5 to effectively
route cables to your device. Pause when the device is halfway inserted, connect the
power and data cabling, and then complete installing the device.
All manuals and user guides at all-guides.com
NSTALLATION
I
NSTALLATION
6
Advertisement
Table of Contents
